Atlantic Irrigation

Dingo® Attachments

There are over 35 attachments for the Toro Dingo®. Ten of our favorites are shown below.  

Please call  516-779-1479 with any questions you have about attachments and availability. 

Vibratory PlowVibratory Plow Dingo Attachment

The Toro Dingo vibratory plow attachment greatly reduces a contractor’s time spent on irrigation and cable installations. Exclusively designed and built by Toro specifically for use on the Dingo, the vibratory plow optimizes pipe-pulling performance while minimizing turf damage during an installation. Also, use the chuted blade and spool carrier to install wire or cable.

Vibratory Plow Features Include: Depth Indicator, Flexible Head, Heavy Cast Coulter, Isolators, and Elliptical Vibrating Motion

High Torque Trencher Dingo Attachment

High Torque Trencher

 

Trencher

The Toro trencher is designed for productivity and durability. Toro trenchers are built to trench through the toughest conditions without flinching.

High Torque Trencher: High-torque, heavy-duty drive system guarantees performance in the toughest soil conditions from rock to caliche. Dig trenches up to 50″ (127 cm) below grade. Heavy-duty nose roller bearing and reversible abrasion-resistant boom give you years of dependable use.

High Speed Trencher: Ideal for fast, efficient trenching in most soil conditions. Great for cable, pipe or irrigation installations.

 

Trench Filler

Trench Filler

Trench Filler

Designed for time and money-saving efficiency. This attachment lets operators fill trenches in a single pass. Two sets of opposing augers direct the spoils from the sides of the trench back into the hole, while the filler levels off the work area – and fluffs the turf on each side of the trench – minimizing its footprint

  • 48″ working width
  • Integrated float allows 5″ of travel
  • Adjustable skids evenly disperse weight

 

 

Auger Dingo Attachment

High Torque Auger

Augers

High Torque: In any drive head, there is a tradeoff between torque (power) and speed (revolutions per minute). The high torque head provides a large amount of torque (power) to the auger at a slower speed. The high torque (power) translates into the Dingo’s capability to dig 30″ (76.2 cm) holes up to 6′ (1.8 m) deep in clay, gravel, sandstone and many other conditions where lower torque heads get stuck.

Universal Swivel: This attachment swivels in all directions to create plumb holes on uneven terrain. The higher speed of this auger power head is ideal for augers up to 24″ (61cm) in diametre. Quickly change between auger bit sizes to dig holes for fence posts, footings, irrigation heads and more!

 

Power Box Rake

Power Box Rake

Box Rake

The Toro® Power Box Rake is the perfect tool for seed bed and sod bed preparation. The rotary drum on the power box rake pulverizes rough soil, cuts high spots and fills low spots in one pass; while removing rocks and debris. Pure carbide teeth design produces the best possible seeded sub-soil, which promote superior moisture retention and rapid see growth. Adjustable yoke allows 20 degrees offset for windrowing debris.

 

 

Toro Diesel TX Platform

Toro Diesel TX Platform

Platform

  • For use on either gas or diesel traked models
  • Counter weight standard on diesel model.
  • Folds up against machine when not in use
  • Rubber mount helps reduce operator vibration

 

 

Adjustable Fork

Adjustable Fork

Forks

Hydraulic Fork:  The Toro Dingo hydraulic tree forks can help you plant trees and large shrubs quickly and effortlessly, plus move all sorts of materials around your garden center or nursery. The Dingo Compact Utility Loader is especially easy to maneuver, helping you transport and position trees or shrubs exactly where you want them.

Adjustable Fork: The Toro Dingo adjustable forks greatly increase the productivity and performance of your Dingo system. This versatile attachment can be used for a variety of material handling jobs to move posts, rocks, trees, pallets, etc. around the job site. It’s like having a roving workstation to transport heavy materials around the job site without fatigue.

 

Buckets

Light Materials Bucket

Light Materials Bucket

Standard: Move rock, dirt, sand or other materials off and around the job site. The hardened steel cutting edge offers improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear. Capacity = 4 cubic feet (1 cu. m.).

Light: Designed for moving light materials like chipbark, mulch, snow and loam. The larger capacity bucket, 6.4 cubic feet (.2 cu. m.), is great for handling larger loads of lighter materials. The hardened steel cutting edge allows for improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear.

Narrow: Handle compact construction and remodeling sites by moving through 36″ (91.4 cm) gates without a problem. This 34.5″ (87.6 cm) wide bucket allows you to get through narrow spaces, including gates and doorways. Move rock, dirt, sand or other materials off and around the job site. Great for use on the Dingo TX 420 or any Dingo model equipped with narrow wheels and tires.

Hydraulic Breaker

Hydraulic Breaker

 

Hydraulic Breaker

Simplifies the tough job of breaking concrete, asphalt, rock or brick during renovation jobs. This rugged unit helps break up footings, sidewalks, foundations and a host of other solid structures. The unique mounting configuration also allows for horizontal alignment, particularly useful in breaking apart walls.

  • Breaks down to 10″ depth
  • 180 ft-lbs of Force
  • Multi-Position Mounting Head

 

 

Backhoe

Backhoe

Backhoe

Attaching is fast and easy! This powerful attachment can be used for various job-site activities – digging foundations, planting trees, trenching for irrigation and utilities installation and much more.

Translate »